1. Help Center
  2. YS PRO installation

Important to know before installation

YS PRO collects real-time data from your boat and relays it via 3G/4G. YS PRO contains an embedded SIM card, during app activation you will be asked to choose a 3G/4G subscription depending on your geographic location.

It is possible to connect YS PRO to another internet source by inserting a SIM card or connecting the YS PRO via ethernet or WI-FI. YS PRO can also be used as a WI-FI hotspot/range extender if a SIM card is inserted or if connected to WI-FI.

YS PRO can be connected to a large number of wireless accessories. These accessories can be added during installation or later. YS PRO only accepts Yacht Sentinel© accessories.

Some sensors have a built-in siren. If an intrusion is detected, YS PRO will trigger all sirens, even those of sensors not causing the alarm.

YS PRO can be powered by 12V, 24V or 48V. In case YS Pro is disconnected from the main battery, its internal battery lasts 12 to 24h.

When the boat is not in use (NMEA 2000 is off), YS PRO has a low power consumption while monitoring 24/7:

- Up to 3 battery banks

- Integrated alarms

- Up to 3 voltage detectors

- All the wireless accessories

YS PRO has an internal relay to remotely update NMEA 2000 data on request from the app. This relay will power the NMEA 2000 network of your boat and automatically turn it off after 5 minutes.